Optimization of cell disruption in Raphidocelis subcapitata and Chlorella vulgaris for biomarker evaluation

Raphidocelis subcapitata and Chlorella vulgaris are bioassay microalgae with rigid cellulosic cell wall which can hinder the release of intracellular proteins often studied as toxicity biomarkers. Since cell disruption is necessary for recovering intracellular biomolecules in these organisms, this study investigated the efficiency of ultrasonication bath; ultrasonication probe; vortexer; and bead mill in disintegrating the microalgae for anti-oxidative enzyme extraction. The extent of cell disruption was evaluated and quantified using bright field microscopy. Disrupted algae appeared as ghosts. The greatest disintegration of the microalgae (83-99.6 %) was achieved using bead mill with 0.42-0.6 mm glass beads while the other methods induced little or no disruption. The degree of cell disruption using bead mill increased with exposure time, beads-solution ratio and agitation speed while larger beads caused less disruption. Findings revealed that bead milling, with specific parameters optimized, is one of the most effective methods of disintegrating the robust algal cells

Oxidative stress responses and cellular energy allocation changes in microalgae following exposure to widely used human antibiotics

The individual effect of four human antibiotics on the microalgae Raphidocelis subcapitata was investigated following a 120-h exposure. The effects were assessed by analyzing growth, and biochemical parameters related with: 1) antioxidant capacity and oxidative damage by measuring superoxide dismutase (SOD) activity and lipid peroxidation (LPO) levels; and 2) cellular energy allocation (CEA) by quantifying the content in energy reserves, which represents the energy available (Ea), and the electron transport system activity that represents a measure of oxygen and cellular energy consumption (Ec). Growth yield inhibitory concentrations of sulfamethoxazole (18-30%), clarithromycin (28.7%), ciprofloxacin (28%) and erythromycin (17-39%) were found to elicit a considerable increase in Ec, thereby causing a significant decrease in the CEA. The elevated Ec can be a result of the need to respond to oxidative stress occurring under those conditions given the significant increase in SOD activity at these levels. For sulfamethoxazole, erythromycin and ciprofloxacin, the antioxidant responses do not seem to be enough to cope with the reactive oxygen species and prevent oxidative damage, given the elevated LPO levels observed. A stimulatory effect on growth yield was observed (up to 16%) at ciprofloxacin lowest concentration, which highly correlated with the increase in CEA. Based on the no observed effect concentration (NOECs) and/or effective concentration (EC10) results, Ec, SOD and CEA were more sensitive than the classical endpoint of growth rate for all the tested antibiotics. By revealing the antibiotic stress effects in R. subcapitata at the cellular level, this study suggests CEA as a more reliable indicator of the organisms' physiological status.info:eu-repo/semantics/publishedVersio

Environmental and Health Concerns Associated with the Open Dumping of Municipal Solid Waste: A Lagos, Nigeria Experience

Abstract Landfill is the simp lest and most commonly used method of disposing municipal solid waste (MSW). In Nigeria, they are better categorized as open dumps, sited for convenience and usually involve the pitching of waste in pre-existing pits. In Lagos, the most populated city in Nigeria, most of these open pits are located near residential quarters and therefore pose a threat to public health and the environ ment. The absence of containment systems at the sites allo ws the possible percolation of leachate into groundwater. In addit ion, the methane gas generated as a result of bacterial degradation of waste is not collected and poses a potential fire hazard. The sites harbour nu merous scrap tyres which not only fuel the fires but are also breeding grounds for disease transmitting vermin. Landfill fires especially those involving tyres emit dio xin which can cause reproductive impairment and cancer in hu mans at extremely low concentrations. Scavenging birds at these sites are potential carriers of diseases. This paper examines the potential environ mental and health risks posed by some unsanitary MSW landfills in Lagos, Nigeria and calls for the need to start adopting modern waste management pract ices to ensure the protection of public health and the environment

Corrosion of food grinding discs in gastro-intestinal environment

The need for food size reduction before consumption has led to the use of motorized grinding machine which operates on energized rubbing of two grooved cast-iron discs, and this unintentionally results in tribological degradation and corrosion of grinding discs into the ground food. The objective of this study was to carry out an assessment of corrosion susceptibility of grinding discs from different manufacturing methods in simulated gastro-intestinal environment. Six grinding discs from three states in Nigeria were selected for this study, based on manufacturing methods namely: rotary, cupola, and pit furnaces. Experimental techniques used for the study included: X-Ray Fluorescence spectroscope for determination of chemical composition and X-Ray Diffractometer was used for phase identification. Corrosion susceptibility of grinding discs on interaction with pseudo-body fluid was studied using potentiodynamic polarization scan and product analysis (gasometric) methods in simulated gastro-intestinal environment, typical of human stomach, as electrolyte. The electrolyte contained 2 g/L NaCl acidified to pH of 1.7 with HCl and regulated at 37 °C. Optical microscopy of the electrochemical samples was done for corrosion damage assessment. The key finding from the study was that all the grinding discs contain iron and silicon as dominant alloy elements, which existed predominantly as iron carbide and ferrosilicon phases. Corrosion of the discs in simulated gastric solution was well profound irrespective of the manufacturing method, though, with varying degree among the discs. The outcome of this study is applicable to food industries where cognitive measures may have to be taken on materials selection to minimise the risk of food contamination from materials corrosion